English
Currency CNY
High quality Industrial water-based paint  water-based paint  precoated primer buy in Hengshui
Buy High quality Industrial water-based paint water-based paint precoated primer
High quality Industrial water-based paint water-based paint precoated primer

High quality Industrial water-based paint water-based paint precoated primer

In stock
Price:
60000 CNY
Wholesale:
  • 55000 CNY/t.  - from 2 t.
Shipping:
Seller
China, Hengshui
(View map)
+86( 
Display phones
Products of other enterprises
Description

product description

  Waterborne precoating primer is a new type of precoated primer made of waterborne polymer, rust paint and additives. It has excellent adhesion and anti-rust performance. If it can be properly constructed, For more than 1 year

Compared with the solvent-based coatings, anti-corrosion coatings, water-based pre-coated primer on the metal substrate processing and construction process requirements are different. If handled or used improperly, the film prone to shrinkage, sagging, blistering and other ills. If you strengthen the construction management, in strict accordance with the requirements of the construction process operation, not only the construction of high efficiency, and can play its best protective performance.

 

Product characteristics

This product is a water-based pre-primer primer for the one-component coating, air-dried polymer emulsion as the base material, and anti-rust paint, additives and other preparation, the paint has the following characteristics:

(1) environmental protection: water as solvent and thinner, VOC content of solvent-based products to reduce 90%, the use of VOC emissions in the total reduction of more than 95%, pollution-free, pollution-free, in line with environmental requirements.

(2) safety: because the water for the release agent, no flash point, non-flammable, non-explosive. In all types of construction without taking strict fire prevention measures, greatly simplifying the storage and transportation, construction conditions, safe and reliable.

(3). Dry quickly: in the standard environmental conditions, less than 20 points can be dry, 2h hard work, greatly reducing the construction interval and cycle.

(4) strong adhesion: air-dried self-crosslinking polymer coating, not only can form a network structure of polymer, but also with the substrate metal surface reaction to produce organic acid salt complex, is a very strong chemical bond with metal Material has a strong adhesion.

(5) pressure crushing: the film after drying to produce excellent adhesion and anti-sticking performance, with the leveling machine crushing does not produce the phenomenon of rolling and falling off.

(6) anti-rust performance: The pre-coated primer polymer itself has excellent sealing, and environmentally friendly anti-rust paint and corrosion inhibitor with anti-rust performance is better than the general solvent-based ethylene phosphating primer, The rust period is generally up to 2 times the latter to ensure that no corrosion during the steel plate processing.

(7) a wide range of compatibility: the polymer because of the high molecular weight, and self-crosslinking functional groups, film drying at room temperature and most of the solvent-based paint with excellent matching, with alkyd, epoxy, Polyurethane, chlorinated rubber, vinyl, nitrocellulose and other solvent-based coating or pastry matching, no alkali and bleeding phenomenon.

 (8) welding performance: with paint cutting, welding, paint film does not blister, do not fall off, do not produce zinc fog pollution, does not affect the quality of the weld.

The following are the same as the "

 

Use

Applicable to railway vehicles, ships, automobile manufacturing process steel pre-coated rust.

 

 

Construction process

1, surface cleaning: remove the surface of oil, rust, floating ash and other effects of coating construction quality of the material.

      2, the construction conditions: coating temperature range of 10-30 ℃, relative humidity of 85% or less, the substrate surface temperature is higher than the dew point of 3 ℃ or more, temperature and humidity

The degree should be measured near the substrate.

 3, paint dilution: the consistency of the coating according to the requirements of the construction method to use water to adjust.

     4, the construction sequence: brush or roller coating, the first time from the top of the sideways to the bottom of the brush, so easy to cause flow marks;

Followed by slowly from top to bottom brush, every time should be at one go; spray, should be in accordance with the "first top of the wall, the first after the next, after the first corner

Plane, from the inside out "in the order.

 

Precautions

Pay attention to the surface treatment before painting. If the surface treatment is improper, any coating may fail in the short term.

In the rain and snow days, the temperature below 0 ℃ and relative humidity greater than 90% can not be built.

3. After storage of this product may be a little delamination, before painting to stir evenly.

This product should be diluted with stirring to the required construction viscosity. Use the seal at any time to prevent the crust, such as the discovery of paint

Skin or particles, should use 80 - 120 mesh screen filter.

5. This product should be sealed in the 0-45 ℃ environment, storage period of 1 year, more than the storage period of the paint must be tested before use.

This product should be stored in a ventilated, dry place, away from heat, to avoid freezing.

Statement

Painting must wear a uniform, gloves, goggles, masks, construction site should be kept well ventilated.

To the skin or clothing should be done as soon as possible before cleaning with water and detergent. Such as splashing into the eyes, cleaning with plenty of water and seeing a doctor.

Contact the seller
High quality Industrial water-based paint water-based paint precoated primer
High quality Industrial water-based paint  water-based paint  precoated primer
Shipping method
Compare0
ClearSelected items: 0