Propene Polymer (PP)
Products from producer
In stock
Reconfirm the price with seller
- Courier
- In detail
Products of other enterprises
Description
Property | Unit |
Test Method |
Test Condition |
Result |
Melt Flow Index |
g/10 min | ASTM D-1238 |
230℃×2.16Kg | 8 |
Tensile Strength at Yield |
MPa | ASTM D-638 |
23℃ | 34 |
Tensile Elongation at Break |
ASTM D-638 |
23℃ | 100 | |
Flexural Modulus |
MPa | ASTM D-790 |
23℃ | 1570 |
Flexural
Strength |
MPa | ASTM D-790 |
23℃ | 46 |
Izod Impact Strength |
ft-lb/in | ASTM D-256 |
23℃ |
1.69 |
Heat Deflection Temperature |
℃ | ASTM D-648 |
0.46MPa | 130 |
Specific Gravity | g/cm3 | ASTM D-792 |
23℃/23℃ | 0.940 |
Fire Retardance | UL 94 | 1.5mm | V-2 |
PP MI35
Density
(g/cm3) |
MFR
(Melt Flow Rate) (g/10min) |
Shrinking Percentage (%) | Rockwell
Hardness (R scale) |
Coefficient
of Stiffness (kg/cm 2) |
IZOD Notch Impact Strength (kg.cm/cm) | HDT(Heat Deflection Temperature)
(℃) |
Softening Temperature
(℃) |
0.90 | 35 | 1.3-1.7 | 100 | 10000 | 23℃ 8.5
-20℃ 2.5 |
105 | 140 |
PP V30G1
Property |
Unit |
Result |
Melt Flow Index |
g/10 min | 16±3.0 |
Tensile Strength at Yield |
MPa | ≥33 |
Rockwell hardness | R-Scale | ≥85 |
Flexural Modulus |
MPa | ≥1350 |
Izod Impact Strength |
J/m | 29 |
Heat Deflection Temperature |
℃ | ≥85 |
Ash Content | % | ≤0.02 |
Cleanness | ≤10 |
PP S7OO
properties project | Test condition | Nominal Value Unit | |
properties | Melt Mass-Flow Rate (MFR) | 230℃,2.16kg | 12-18g/10min |
mechanical | Tension yield strength | ≥32.0 MPa | |
Other properties | isotacticity index | ≥96.0% | |
color chip | ≤5/kg | ||
Powder ash | ≤0.01%(m/m) | ||
fisheye | 0.8mm | ≤3 /1520cm2 | |
fisheye | 0.4mm | ≤10 /1520cm2 |
We can supply PP GP1008, PP MI35, PP V30G,PP S7OO PP K1011 K1020 K1023 K1035 K2000 K4515 K4535 K7005 K8003 K8009 K8025 PP 6331 PPP J3001 PJ3004 PP Z30S F280M and many so on.
Contact the seller
Propene Polymer (PP)
We recommend to see