Factory high quality industrial water-soluble polyurethane paint
- 55000 CNY/t. - from 2 t.
- Courier
- In detail
Product description
Water-based paint and paint the fundamental difference is that the solvent is different, the paint is a toxic, contaminated solvent as a thinner, containing a lot of benzene, formaldehyde and other harmful substances, and water-based paint is water as solvent, non-toxic and tasteless, In contrast to the paint, water-based paint is the best choice to replace it, whether it is from the human health, environmental pollution or resource conservation, production processes to simplify and later storage and transportation, water-based paint have an absolute advantage.
Jinlong water-based polyurethane polyurethane paint is based on water-based polyurethane resin as the base material to water as a dispersion of a class of paint, with low production costs, non-combustible, non-toxic, non-polluting the environment, saving organic solvents and so on. In addition, it retains some of the excellent properties of conventional solvent-borne polyurethane coatings and has good adhesion to paper, wood, fibreboard, plastic film, metal, glass and leather. Water-based and solvent-based polyurethane resin, its toxicity is small, excellent color retention.
Product parameters
Number of components |
one |
Mass density |
1.3kg / l |
Volume solids |
45±2%(volume)60±2%(weight) |
VOC |
Directive 1999/13 / EC, SED: max 29.0 g / kg. 35.0 g / l (about 0.3 lb / |
Dry touch |
1h |
Recoat interval |
At least :4 hours Max: Unlimited |
Shelf life |
Store at least 18 months cool and dry |
Product characteristics
1. durable and easy to clean,Features
2. Not powdery
3. Excellent adhesion to various types of aging or weathering paints
4. can be cured at a certain high temperature
5. Can be coated with a dispersive coating
6. Reduce the risk of explosion and fire hazards
Use
High performance and low VOC content of water-based polyurethane coating has a broad application prospects, gradually being widely used as architectural coatings, automotive coatings, plastic coatings, industrial coatings and corrosion protection coatings to meet different performance requirements.
Construction process
Before the construction, clean the base surface, handle the slit and deformation joints, the surface must be intact, dry, the surface or the temperature of the coating should not be applied or less than + 15 ° C during drying. Do not contain salt and any contaminants. Repair damaged primer. Stir before using the first, in the base surface brushing again paint, dry and coated after the second coating.
Cautions and statements
Although this is an aqueous coating, care should be taken to avoid inhalation of the spray, as well as contact between the wet coating and the exposed skin or eyes.